This vacuum brazed product provides customers with the dual advantage of very a high performance tungsten carbide combined with a very smooth surface finish. Ideal in static and dynamic applications where chrome carbide cannot provide the wear life in 6-20mm thick sections.
Tungsten carbide plates bonded to base steel plates making them easy to manufacture in ready made liner kits for easy site or workshop install for your needs.
RECOMMEND GRADES AND SPECIFICATIONS:
|
Grade |
Equal to ISO Category Number |
Performance |
Performance&application recommended |
|
Density G/Cm 3 |
Bend Strength N/mm 2 |
Hardness HRA |
|
YG3 |
K01 |
14.9-15.3 |
≥1180 |
≥90.5 |
Sand-blasting nozzles qualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting n |
|
YG3X |
K01 |
15.1-15.4 |
≥1300 |
≥91.5 |
|
YK05 |
|
14.95 |
2500 |
90.5 |
Mostly used as the buttons of small and bits medium sized percussion |
|
YG8C |
|
14.8 |
2400 |
88.5 |
and as the inserts of rotary prospecting bits to cut soft and |
|
medium hard formations. |
|
YG6 |
|
14.95 |
1900 |
90.5 |
For coring crowns,electric coal drill bits, coal cutting picks,oil |
|
cone bits and scraping knife bits,used in coal geological prospecting, |
|
mining and oil well boring. |
|
YG6X |
K10 |
14.8-15.1 |
≥1560 |
≥91.0 |
Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron. |
|
YG6A |
K10 |
14.7-15.1 |
≥1580 |
≥91.0 |
|
YG6 |
K20 |
14.7-15.1 |
≥1670 |
≥89.5 |
Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc. |
|
YG8 |
K30 |
14.6-14.9 |
≥1840 |
≥89 |
Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts. |
|
YG10X |
|
14.5 |
2400 |
91.5 |
Fine grain alloy, good wear resistance,Used for processing hard |
|
wood, veneer board,PCB,PVC and metals. |
|
YG11 |
|
14.4 |
2600 |
88.5 |
Forming or stamping dies for metal powders and nonmental powders. |
|
YG11C |
K40 |
14.4 |
2700 |
86.5 |
Largely for the inserts and buttons of percussion bits and tricone bits to cut medium |
|
hard, hard and very hard formations. |
|
YG15 |
K40 |
14 |
2800 |
87.5 |
For fabricating drawing dies of steel tubesand rods under high |
|
compressibility ratio;punching,stamping,forging tools under large stress. |
|
YG15C |
|
14 |
3000 |
85.5 |
For oil cone dril bits, for medium soft and medium-hard rocks. |
|
YG16C |
|
13.9 |
2900 |
85.5 |
Impact resistance, hot&forging dies etc. |
|
YGH40 |
|
13.5-13.9 |
≥2450 |
≥83.0 |
Mainly for making hot dies. |
|
YG20 |
|
13.5 |
3200 |
85.5 |
For fabricating of stamping dies for watch parts, spring plates of musical |
|
|
|
|
|
|
instruments, battery jars,small sized steel balls,screws,screw caps. |
|
YG18C |
|
13.7 |
3100 |
84.5 |
Impact resistance forging dies,hot-press forging dies and rollers. |
|
YG20C |
|
13.5 |
3300 |
83.5 |
Dies for wear resistant or impact resistant application. |
|
YG22C |
|
13.3 |
3500 |
83 |
Nut forming dies and high impact resistance forging dies. |
|
YG25C |
|
13.1 |
3600 |
82.5 |
Stainless bolt header dies and rollers. |
|
YT15 |
P10 |
11.1-11.6 |
≥1180 |
≥91.0 |
Qualified for rough machining, semi-finish machining and finish machining during consecutive machining of carbon steel and alloy steel. |
|
YT14 |
P20 |
11.2-11.8 |
≥1270 |
≥90.5 |
Qualified for rough machining for rough face of carbon steel and alloy steel, half process during discontinuity cutting. |
|
YT5 |
P30 |
12.5-13.2 |
≥1430 |
≥89.5 |
Qualified for rough machining for rough face of carbon steel and alloy steel and discontinuity cutting. |
Zhuzhou Hongtong's wear parts are widely used in many different industries, such as mining, cement, coal, agriculture, forest, oil, gas and also other areas.
You can talk to us for any request and we will give you a best wear solution!
Welcome to Zhuzhou Hongtong Tungsten Carbide Co.,Ltd. We are an independent supplier of wear solutions to a number of industries, including mining, mineral processing and manufacturing. Located in city of Zhuzhou, we have an extensive national and global network of tungsten carbide product suppliers capable of providing the right wear solution, anytime, anywhere.
