• Special shaped cemented carbide plate
  • Special shaped cemented carbide plate
  • Special shaped cemented carbide plate
  • Special shaped cemented carbide plate

Special shaped cemented carbide plate

K10/K20/K30

Tungsten carbide plates have excellent hardness, high hardness, good wear resistance, high modulus of elasticity, high compressive strength, and good chemical stability (acid resistance, alkali resistance, high-temperature oxidation resistance) Low impact toughness, low coefficient of expansion, heat conduction, and conductivity are similar to those of iron and its alloys.

  • Excellent red hardness, high hardness, good wear resistance and chemical
    stability.

  • Non-destructive ultrasonic flaw detection, without sand hole and pore.

  • Tungsten carbide plate is sintered by HIP-sinter furnace, greatly reduce
    porosity, enhance compactness.

  • Effectively prevent the occurrence of pressing defects by isostatic
    pressing machine, and the density is more uniform for cemented carbide
    plate blanks.

  • Stress released, avoid the occurrence of cracks in the cutting and forming
    process.

 RECOMMEND GRADES AND SPECIFICATIONS:

Grade Binder (Wt %) Density (g/cm3) Hardness (HRA) TRS (≥N/mm²)
YG6 6 14.9 90.5 2100
YG6A 6 14.95 92 2000
YG8 8 14.8 89.5 2200
YG13 13 14.2 87.5 2650
YG8C 8 14.7 88 2300
YG15 15 14 87 2750
YG20 20 13.5 85.5 2850

Application of Tungsten Carbide Plate:

1. Suitable for producing cast iron rolls and high chromium roll cutters.
2. It is suitable for the production of electronic stamping dies such as discharge plates, stamping dies, and cold stamping dies.
3. Used for stamping dies. It is used to produce high-speed molds for copper, aluminum, stainless steel, cold-rolled sheet, El plate, Q195, SPCC, silicon steel sheet, metal, standard parts, upper and lower punches, etc.
4. The wear resistance of tungsten carbide plate is high, suitable for hardwood, log, aluminum, copper rod, cast iron processing and production of various types of motors, electronic molds, stamping electronic molds.
5. The use of cemented carbide materials is different, and the material properties are inconsistent. When using it, the appropriate cemented carbide plate should be selected according to the use.

Related Products

As a professional tungsten carbide manufacturer from China, with more than 20 years’ experience, we have skilled engineers and technical know-how, to meet any of your carbide request.

Contact Details


MAIL US ATarris@zzhthj.com
CALL US ON:+86 731 28487117
ADDRESS:No.86,Mingri Rd,Tianyuan Dist,Zhuzhou,Hunan,China 412007